天天干天天操天天射,av你懂的,天天插天天射天天干

Zytel? ST811HS NC010

Manufacturer: Celanese
Produced At: Import/ China
Product Category: NYLON 6/PA6
Product No: Zytel? ST811HS NC010
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized

Product information

Zytel? ST811HS NC010

NYLON RESIN

Product Description:

Super Toughened, Heat Stabilized, Polyamide 6

Additive	Heat Stabilizer，Mold Release
Features	Heat Stabilized
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	ExtrusionInjection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Stress vs. Shear Rate (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Tensile Modulus vs. Temperature, Dynamic (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)	PA6-HI
Resin ID (ISO 1043)	PA6-HI

Physical	Dry	Conditioned	Unit	Test Method
Density	1.04	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	1.4	--	%
Flow	0.90	--	%
Water Absorption				ISO 62
Saturation, 73°F, 0.0787 in	6.8	--	%
Equilibrium, 73°F, 0.0787 in, 50% RH	2.3	--	%
Hardness	Dry	Conditioned	Unit	Test Method
Rockwell Hardness (M-Scale)	60	--		ISO 2039-2

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	131000	58000	psi	ISO 527-2
Tensile Stress (Yield)	4500	--	psi	ISO 527-2
Tensile Strain (Yield)	29	--	%	ISO 527-2
Nominal Tensile Strain at Break	> 50	--	%	ISO 527-2
Flexural Modulus	123000	52200	psi	ISO 178
Poisson's Ratio	0.45	0.47		ISO 527
Films	Dry	Conditioned	Unit	Test Method
Tensile Elongation - MD (Yield)	4.0	--	%	ISO 527-3
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	6.7	6.2	ft·lb/in2
73°F	34	61	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	No Break	No Break
73°F	No Break	No Break
Multi-Axial Instrumented Impact Energy				ISO 6603-2
-22°F	18.4	--	ft·lb
73°F	11.8	--	ft·lb

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)	117	--	°F	ISO 75-2/A
Glass Transition Temperature 3	122	32.0	°F	ISO 11357-2
Vicat Softening Temperature	203	--	°F	ISO 306/B50
Melting Temperature 3	424	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	1.1E-4	--	in/in/°F
Transverse	1.0E-4	--	in/in/°F

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	--	1.0E+15	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+13	ohms·cm	IEC 60093
Electric Strength	790	--	V/mil	IEC 60243-1
Dissipation Factor				IEC 60250
100 Hz	8.0E-3	0.055
1 MHz	0.014	0.18
Flammability	Dry	Conditioned	Unit	Test Method
Burning Rate 4 (0.0394 in)	< 3.9	--	in/min	ISO 3795
Flame Rating				UL 94, IEC 60695-11-10, -20
0.030 in	HB	--
0.06 in	HB	--
FMVSS Flammability	B	--		FMVSS 302

Fill Analysis	Dry	Conditioned	Unit
Melt Density	0.880	--	g/cm3
Ejection Temperature	374	--	°F
Specific Heat Capacity of Melt	0.621	--	Btu/lb/°F
Thermal Conductivity of Melt	1.0	--	Btu·in/hr/ft2/°F

Injection	Dry	Unit
Drying Temperature	140	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Processing (Melt) Temp	500 to 536	°F
Melt Temperature, Optimum	518	°F
Mold Temperature	122 to 194	°F
Mold Temperature, Optimum	158	°F
Holding Pressure	7250 to 14500	psi
Drying Recommended	yes
Hold Pressure Time	4.00	s/mm
Maximum Screw Tangential Speed	709	in/min

Products

Products

Zytel? ST811HS NC010

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service