激情av,给个网站你懂的,嫩草大剧院

Zytel? ST7301 NC010

Manufacturer: Celanese
Produced At: Import/ China
Product Category: NYLON 6/PA6
Product No: Zytel? ST7301 NC010
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized

Product information

Zytel? ST7301 NC010

NYLON RESIN

Product Description:

Super Toughened Polyamide 6

Additive	Heat StabilizerLubricantMold Release
Features	Heat Stabilized
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	CastingCoatingExtrusionFilm ExtrusionInjection MoldingProfile ExtrusionSheet Extrusion
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)Secant Modulus vs. Strain (ISO 11403-1)Shear Stress vs. Shear Rate (ISO 11403-1)Specific Volume vs Temperature (ISO 11403-2)Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)	PA6-HI
Resin ID (ISO 1043)	PA6-HI

Physical	Dry	Conditioned	Unit	Test Method
Density	1.06	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	1.0	--	%
Across Flow : 176°F, 48 hr	0.10	--	%
Flow	1.0	--	%
Flow : 176°F, 48 hr	0.10	--	%
Water Absorption (Equilibrium, 73°F, 0.0787 in, 50% RH)	2.7	--	%	ISO 62
Viscosity Number (96% H2SO4 (Sulphuric Acid))	160	--	cm3/g	ISO 307
Hardness	Dry	Conditioned	Unit	Test Method
Ball Indentation Hardness 2 (H 358/30)	13800	--	psi	ISO 2039-1

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	261000	79800	psi	ISO 527-2
Tensile Stress (Yield)	6960	4210	psi	ISO 527-2
Tensile Strain (Yield)	4.0	30	%	ISO 527-2
Nominal Tensile Strain at Break	> 50	> 50	%	ISO 527-2
Flexural Modulus	247000	79800	psi	ISO 178
Flexural Stress (3.5% Strain)	7690	4640	psi	ISO 178
Poisson's Ratio	0.41	0.47		ISO 527
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-40°F	8.6	8.1	ft·lb/in2
-22°F	8.1	8.6	ft·lb/in2
73°F	38	57	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	No Break	No Break
73°F	No Break	No Break
Notched Izod Impact Strength				ISO 180/1A
-40°F	7.1	6.2	ft·lb/in2
-22°F	6.7	7.1	ft·lb/in2
73°F	29	45	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	203	--	°F	ISO 75-2/B
264 psi, Unannealed	124	--	°F	ISO 75-2/A
Melting Temperature 3	430	--	°F	ISO 11357-3

Flammability	Dry	Conditioned	Unit	Test Method
Burning Rate 4 (0.0394 in)	< 3.9	--	in/min	ISO 3795
FMVSS Flammability	B	--		FMVSS 302

Fill Analysis	Dry	Conditioned	Unit
Melt Density	0.960	--	g/cm3
Specific Heat Capacity of Melt	0.621	--	Btu/lb/°F
Thermal Conductivity of Melt	1.0	--	Btu·in/hr/ft2/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.20	%
Processing (Melt) Temp	500 to 536	°F
Melt Temperature, Optimum	518	°F
Mold Temperature	122 to 194	°F
Mold Temperature, Optimum	158	°F
Holding Pressure	7250 to 14500	psi
Drying Recommended	yes
Hold Pressure Time	4.00	s/mm
Maximum Screw Tangential Speed	709	in/min

Products

Products

Zytel? ST7301 NC010

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service