黄色片视频,久久精品99久久久久久久久,91在线精品秘密一区二区

CYCOLAC? Resin FR15

Manufacturer: SABIC
Produced At: Import/ China
Product Category: Polycarbonate
Product No: CYCOLAC Resin FR15
Product Quantity: 25KG / BAG
Product Features: Flame Retardant，Good Moldability，Good Toughness

Product information

CYCOLAC? Resin FR15

Acrylonitrile Butadiene Styrene

SABIC Innovative Plastics

Product Description:

Flame retardant ABS (non-PBBE additive). Good property/toughness. Excellent moldability. UL94 V-0/5VA rated.

Additive	Flame Retardant
Features	Flame Retardant,Good Moldability,Good Toughness
Processing Method	Injection Molding
Multi-Point Data	Coefficient of Thermal Expansion vs. Temperature (ASTM E831) Flexural DMA (ASTM D4065) Shear DMA (ASTM D4065) Specific Heat vs. Temperature (ASTM D3417) Tensile Fatigue Tensile Stress vs. Strain (ASTM D638) Thermal Conductivity vs. Temperature (ASTM E1530) Viscosity vs. Shear Rate (ASTM D3835)

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity
--	1.20		ASTM D792
--	1.19	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR)
230°C/3.8 kg	4.0	g/10 min	ASTM D1238
220°C/5.0 kg	10	g/10 min	ISO 1133
Molding Shrinkage - Flow (0.126 in)	5.0E-3 to 7.0E-3	in/in	Internal Method

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus 3	340000	psi	ASTM D638
Tensile Strength
Yield 4	6000	psi	ASTM D638
Yield	5980	psi	ISO 527-2/50
Break 4	5100	psi	ASTM D638
Break	4540	psi	ISO 527-2/50
Tensile Elongation
Yield 4	2.3	%	ASTM D638
Yield	2.1	%	ISO 527-2/50
Break 4	9.0	%	ASTM D638
Break	34	%	ISO 527-2/50
Flexural Modulus 5 (1.97 in Span)	395000	psi	ASTM D790
Flexural Strength 5 (Yield, 1.97 in Span)	10400	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength 6 (73°F)	9.3	ft·lb/in2	ISO 179/1eA
Notched Izod Impact
73°F	4.0	ft·lb/in	ASTM D256
-22°F 7	3.1	ft·lb/in2	ISO 180/1A
73°F 7	8.9	ft·lb/in2	ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)	300	in·lb	ASTM D3763

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed, 0.126 in	180	°F	ASTM D648
264 psi, Unannealed, 0.126 in	158	°F	ASTM D648
264 psi, Unannealed, 2.52 in Span 8	164	°F	ISO 75-2/Af
Vicat Softening Temperature
--	187	°F	ASTM D1525 9
--	178	°F	ISO 306/B50
--	183	°F	ISO 306/B120
CLTE			ASTM E831
Flow : -40 to 104°F	4.7E-5	in/in/°F
Transverse : -40 to 104°F	4.8E-5	in/in/°F
RTI Elec	140	°F	UL 746
RTI Imp	140	°F	UL 746
RTI Str	140	°F	UL 746

Electrical	Nominal Value	Test Method
Arc Resistance 10	PLC 7	ASTM D495
Comparative Tracking Index (CTI)	PLC 2	UL 746
High Amp Arc Ignition (HAI)	PLC 4	UL 746
High Voltage Arc Tracking Rate (HVTR)	PLC 4	UL 746
Hot-wire Ignition (HWI)	PLC 3	UL 746
Flammability	Nominal Value	Test Method
Flame Rating		UL 94
0.06 in	V-0
0.10 in	5VA

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (392°F, 1000 sec^-1)	290	Pa·s	ASTM D3835

Injection	Nominal Value	Unit
Drying Temperature	180 to 190	°F
Drying Time	2.0 to 4.0	hr
Drying Time, Maximum	6.0	hr
Suggested Max Moisture	0.10	%
Suggested Shot Size	50 to 70	%
Rear Temperature	340 to 360	°F
Middle Temperature	380 to 400	°F
Front Temperature	390 to 420	°F
Nozzle Temperature	390 to 430	°F
Processing (Melt) Temp	390 to 430	°F
Mold Temperature	120 to 160	°F
Back Pressure	50.0 to 100	psi
Screw Speed	30 to 60	rpm
Vent Depth	1.5E-3 to 2.0E-3	in

Products

Products

CYCOLAC? Resin FR15

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service