Elastollan? 1195A10
Thermoplastic Polyurethane Elastomer (Polyether)
Product Description:
Elastollan? 1195A is specifically formulated for extruded profile, sheet and film applications. It exhibits excellent abrasion resistance, toughness, transparency, very good low temperature flexibility, hydrolytic stability and fungus resistance. It has excellent damping characteristics and outstanding resistance to tear propagation. Elastollan? 1195A is rated UL-94 HB in vertical flame test for wall thicknesses of 0.75 and 3.0 mm. Elastollan? 1195A also conforms to the FDA food contact regulations as described in book 21, section 177.2600 for wet food contact applications. Elastollan? 1195A also has NSF Standard 61 "Water Contact Material" certification. Elastollan?1195A is supplied uncolored and in diced or pelletized form.
Agency Ratings | FDA 21 CFR 177.2600、NSF STD-61 |
Appearance | |
Processing Method | Extrusion、Injection Molding |
Density / Specific Gravity | 1.14 |
| ASTM D792 |
Melt Mass-Flow Rate (MFR) (210°C/10.0 kg) | 35 to 65 | g/10 min | ASTM D1238 |
Durometer Hardness (Shore A) | 95 |
| ASTM D2240 |
Tensile Modulus (Injection Molded) | 7500 | psi | ASTM D412 |
Flexural Modulus (Injection Molded) | 7600 | psi | ASTM D790 |
Taber Abrasion Resistance | 55.0 | mg | ASTM D1044 |
Abrasion - DIN | 25 | mm3 | DIN 53516 |
Tensile Stress |
|
| ASTM D412 |
100% Strain | 2500 | psi |
|
300% Strain | 5200 | psi |
|
Tensile Strength | 5700 | psi | ASTM D412 |
Tensile Elongation (Break) | 430 | % | ASTM D412 |
Tear Strength 2 | 800 | lbf/in | ASTM D624 |
Compression Set |
|
| ASTM D395B |
73°F, 22 hr | 30 | % |
|
158°F, 22 hr | 45 | % |
|
Glass Transition Temperature | -18.4 | °F | Internal Method |
Vicat Softening Temperature | 261 | °F | ASTM D1525 |
Softening Point - DMA | 192 | °F | Internal Method |
Flame Rating |
|
| UL 94 |
0.030 in | HB |
|
|
0.12 in | HB |
|
|
Drying Temperature | 230 to 248 | °F |
|
Drying Time | 2.0 to 3.0 | hr |
|
Suggested Max Moisture | 0.030 | % |
|
Rear Temperature | 374 to 428 | °F |
|
Middle Temperature | 374 to 428 | °F |
|
Front Temperature | 374 to 428 | °F |
|
Nozzle Temperature | 410 to 437 | °F |
|
Drying Temperature | 230 to 248 | °F |
|
Drying Time | 2.0 to 3.0 | hr |
|
Cylinder Zone 1 Temp. | 338 to 410 | °F |
|
Cylinder Zone 3 Temp. | 338 to 410 | °F |
|
Cylinder Zone 5 Temp. | 338 to 410 | °F |
|
Adapter Temperature | 392 to 428 | °F |
|
Die Temperature | 383 to 419 | °F |
|
