毛片av网址,自拍偷拍色,天天天综合网

Ultradur? B 4500

Manufacturer: BASF
Produced At: Europe / China
Product Category: PBT
Product No: Ultradur B4500
Product Quantity: 25KG / BAG
Product Features: Medium Viscosity

Product information

Ultradur? B 4500

Polybutylene Terephthalate

BASF Corporation

Product Description:

Medium-viscosity grade for the production of extruded cast films and thin-walled profiles and pipes.

Uses	Cast Film、Piping、Profiles
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Appearance	Natural Color
Forms	Pellets
Processing Method	Cast Film、Injection Molding、Pipe Extrusion、Profile Extrusion
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1)Isochronous Stress vs. Strain (ISO 11403-1)Isothermal Stress vs. Strain (ISO 11403-1)Secant Modulus vs. Strain (ISO 11403-1)Specific Volume vs Temperature (ISO 11403-2)Viscosity vs. Shear Rate (ISO 11403-2)
Resin ID (ISO 1043)	PBT

Physical	Nominal Value	Unit	Test Method
Density	1.30	g/cm3	ISO 1183
Apparent (Bulk) Density	0.70 to 0.80	g/cm3
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)	1.28	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.9	%
Flow	1.6	%
Water Absorption			ISO 62
Saturation, 73°F	0.50	%
Equilibrium, 73°F, 50% RH	0.25	%
Viscosity Number 3	130	cm3/g	ISO 307
Mold Shrinkage 4
free, longitudinal	1.5	%
free, transverse	1.5	%
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)	18900	psi	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	363000	psi	ISO 527-2
Tensile Stress (Yield)	7980	psi	ISO 527-2/50
Tensile Strain (Yield)	3.7	%	ISO 527-2/50
Nominal Tensile Strain at Break	> 50	%	ISO 527-2/50
Tensile Creep Modulus 5 (1000 hr)	174000	psi	ISO 899-1
Flexural Modulus	334000	psi	ISO 178
Flexural Stress	12300	psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	1.9	ft·lb/in2
73°F	2.5	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	86	ft·lb/in2
73°F	No Break

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	329	°F	ISO 75-2/B
264 psi, Unannealed	149	°F	ISO 75-2/A
Melting Temperature	433	°F	ISO 11357-3
CLTE - Flow (73 to 176°F)	7.2E-5 to 8.9E-5	in/in/°F	ISO 11359-2
Specific Heat	0.299	Btu/lb/°F
Thermal Conductivity	1.9	Btu·in/hr/ft2/°F	DIN 52612
Maximum Service Temperature - short cycle operation	392	°F
Temperature Index - at 50% loss of tensile strength			IEC 60216
-- 6	248	°F
-- 7	284	°F

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+13	ohms	IEC 60093
Volume Resistivity	1.0E+16	ohms·cm	IEC 60093
Relative Permittivity			IEC 60250
100 Hz	3.30
1 MHz	3.30
Dissipation Factor			IEC 60250
100 Hz	1.0E-3
1 MHz	0.020
Comparative Tracking Index			IEC 60112
Solution A	550	V
Solution B	450	V
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.030 in	HB
0.06 in	HB

Additional Information	Nominal Value		Test Method
ISO Type	PBT, E+F+MGHLN, 13-030		ISO 7792

Injection	Nominal Value	Unit
Processing (Melt) Temp	482 to 527	°F
Mold Temperature	104 to 158	°F
Extrusion	Nominal Value	Unit
Melt Temperature	482 to 527	°F

Products

Products

Ultradur? B 4500

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service