91看片在线播放,亚洲成人a√,一区二区视频电影在线观看

Ultraform? N 2720 M63

Manufacturer: BASF
Produced At: Europe / China
Product Category: Acetal (POM) Copolymer
Product No: Ultraform N2720 M63
Product Quantity: 25KG / BAG
Product Features: Copolymer、High Hardness、High Stiffness、High Strength、Low Warpage

Product information

Ultraform? N 2720 M63

Acetal (POM) Copolymer

BASF Corporation

Product Description:

Mineral-reinforced material for low-warpage moldings with high stiffness, strength and hardness.

Filler / Reinforcement	Mineral, 30% Filler by Weight
Features	Copolymer High Hardness High Stiffness High Strength Low Warpage
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Granules
Processing Method	Injection Molding
Multi-Point Data	Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)
Resin ID (ISO 1043)	POM-M30

Physical	Nominal Value	Unit	Test Method
Density	1.65	g/cm3	ISO 1183
Apparent (Bulk) Density	0.85	g/cm3
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)	0.232	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.5	%
Flow	1.2	%
Water Absorption			ISO 62
Saturation, 73°F	0.90	%
Equilibrium, 73°F, 50% RH	0.15	%
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 961/30)	27600	psi	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1.02E+6	psi	ISO 527-2
Tensile Stress (Yield)	10900	psi	ISO 527-2/50
Tensile Strain (Yield)	5.0	%	ISO 527-2/50
Nominal Tensile Strain at Break	6.0	%	ISO 527-2/50
Tensile Creep Modulus 3 (1000 hr)	399000	psi	ISO 899-1
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	1.4	ft·lb/in2
73°F	1.7	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	26	ft·lb/in2
73°F	26	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)	284	°F	ISO 75-2/A
Melting Temperature	331	°F	ISO 11357-3
CLTE - Flow (73 to 131°F)	2.5E-5	in/in/°F	ISO 11359-2
Maximum Service Temperature - short cycle operation	230	°F

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+14	ohms	IEC 60093
Volume Resistivity	1.0E+14	ohms·cm	IEC 60093
Electric Strength	2200	V/mil	IEC 60243-1
Relative Permittivity (1 MHz)	4.20		IEC 60250
Dissipation Factor (1 MHz)	5.0E-3		IEC 60250
Comparative Tracking Index (Solution A)	600	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flammability Classification (0.06 in)	HB		IEC 60695-11-10, -20

Additional Information	Nominal Value		Test Method
ISO Type	POM-K, M-GNR, 02-003, M30		ISO 9988-1

Injection	Nominal Value	Unit
Drying Temperature	212	°F
Drying Time	3.0	hr
Suggested Max Moisture	0.20	%
Hopper Temperature	392	°F
Rear Temperature	401	°F
Middle Temperature	401	°F
Front Temperature	410	°F
Nozzle Temperature	410	°F
Processing (Melt) Temp	374 to 446	°F
Mold Temperature	140 to 248	°F
Residence Time	< 10.0	min
Screw Speed	< 709	in/min

Products

Products

Ultraform? N 2720 M63

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service