Makroblend? UT4045 G
Polycarbonate + PBT
(PC+PBT)-blend, 20% Glass fiber reinforced, easy release, injection molding. Makroblend UT4045G offers a high stiffness, excellent chemical resistance, good flowability and exceptional dimensional stability.
Filler / Reinforcement | |
Features | - Chemical Resistant，Good Dimensional Stability，Good Flow，Good Mold Release，High Stiffness
|
RoHS Compliance | |
Processing Method | |
Density (73°F) | 1.40 | g/cm3 | ISO 1183 |
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg) | 1.83 | in3/10min | ISO 1133 |
Molding Shrinkage |
|
| ISO 2577 |
Across Flow 2 | 0.20 to 0.60 | % |
|
Across Flow : 194°F, 1 hr | < 0.10 | % |
|
Flow 2 | 0.20 to 0.60 | % |
|
Flow : 194°F, 1 hr | < 0.10 | % |
|
Across Flow : 500°F, 0.118 in 3 | 0.50 to 0.70 | % |
|
Flow : 500°F, 0.118 in 3 | 0.20 to 0.40 | % |
|
Water Absorption |
|
| ISO 62 |
Saturation, 73°F | 0.30 | % |
|
Equilibrium, 73°F, 50% RH | 0.15 | % |
|
Ball Indentation Hardness | 13100 | psi | ISO 2039-1 |
Tensile Modulus (73°F) | 943000 | psi | ISO 527-2/1 |
Tensile Stress |
|
| ISO 527-2/5 |
Yield, 73°F | 14500 | psi |
|
Break, 73°F | 14500 | psi |
|
Tensile Strain |
|
| ISO 527-2/5 |
Yield, 73°F | 3.0 | % |
|
Break, 73°F | 3.0 | % |
|
Nominal Tensile Strain at Break (73°F) | 3.0 | % | ISO 527-2/5 |
Flexural Modulus 4 (73°F) | 885000 | psi | ISO 178 |
Flexural Stress 4 (73°F) | 23200 | psi | ISO 178 |
Flexural Strain at Flexural Strength 5 (73°F) | 3.0 | % | ISO 178 |
Charpy Unnotched Impact Strength |
|
| ISO 179/1eU |
-22°F | 19 | ft·lb/in2 |
|
73°F | 21 | ft·lb/in2 |
|
Notched Izod Impact Strength |
|
| ISO 180/A |
-22°F | 2.9 | ft·lb/in2 |
|
73°F | 2.9 | ft·lb/in2 |
|
Unnotched Izod Impact Strength |
|
| ISO 180 |
-22°F | 17 | ft·lb/in2 |
|
73°F | 19 | ft·lb/in2 |
|
Heat Deflection Temperature |
|
|
|
66 psi, Unannealed | 266 | °F | ISO 75-2/B |
264 psi, Unannealed | 230 | °F | ISO 75-2/A |
Vicat Softening Temperature | 284 | °F | ISO 306/B120 |
CLTE |
|
| ISO 11359-2 |
Flow : 73 to 131°F | 3.9E-5 | in/in/°F |
|
Transverse : 73 to 131°F | 1.9E-5 | in/in/°F |
|
Surface Resistivity | > 1.0E+17 | ohms | IEC 60093 |
Volume Resistivity (73°F) | > 1.0E+17 | ohms·cm | IEC 60093 |
Electric Strength (73°F, 0.0394 in) | 840 | V/mil | IEC 60243-1 |
Relative Permittivity |
|
| IEC 60250 |
73°F, 100 Hz | 3.60 |
|
|
73°F, 1 MHz | 3.40 |
|
|
Dissipation Factor |
|
| IEC 60250 |
73°F, 100 Hz | 1.3E-3 |
|
|
73°F, 1 MHz | 0.014 |
|
|
Comparative Tracking Index (Solution A) | 175 | V | IEC 60112 |
