VESTAKEEP? 2000 FC30
Polyetheretherketone
Carbon fiber-reinforced, graphite and PTFE-filled polyether ether ketone
VESTAKEEP 2000 FC30 is a medium-viscosity, carbon fiber-reinforced, graphite and PTFEfilled
polyether ether ketone for injection molding. Parts made of this resin can be used for bearing bushing or gearbox parts, due to the self-lubricating effect.
The semi-crystalline polymer features superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP 2000 FC30 are self-extinguishing.
VESTAKEEP 2000 FC30 can be processed by common injection-molding machines for thermoplastics.
We recommend a melt temperature between 370°C and 380°C during the injection molding process. If temperatures exceed 380°C, toxic gases can be released. Adequate ventilation and protective
equipment must be provided. The mold temperature should be within a range of 160°C to 200°C, preferably 180°C.
Filler / Reinforcement | |
Additive | |
Features | |
Uses | |
Forms | |
Processing Method | |
Density | 1.45 | g/cm3 | ISO 1183 |
Melt Volume-Flow Rate (MVR) (380°C/5.0 kg) | 0.915 | in3/10min | ISO 1133 |
Molding Shrinkage 2 |
|
| ISO 294-4 |
Across Flow : 356°F, 0.0787 in | 0.40 | % |
|
Flow : 356°F, 0.0787 in | 0.10 | % |
|
Tensile Modulus | 1.67E+6 | psi | ISO 527-2 |
Tensile Stress (Break) | 21000 | psi | ISO 527-2 |
Tensile Strain (Break) | 2.0 | % | ISO 527-2 |
Charpy Notched Impact Strength |
|
| ISO 179/1eA |
-22°F, Complete Break | 2.4 | ft·lb/in2 |
|
73°F, Complete Break | 2.9 | ft·lb/in2 |
|
Charpy Unnotched Impact Strength |
|
| ISO 179/1eU |
-22°F, Complete Break | 19 | ft·lb/in2 |
|
73°F, Complete Break | 19 | ft·lb/in2 |
|
Heat Deflection Temperature |
|
|
|
66 psi, Unannealed | 639 | °F | ISO 75-2/B |
264 psi, Unannealed | 608 | °F | ISO 75-2/A |
Vicat Softening Temperature |
|
|
|
-- | 644 | °F | ISO 306/A |
-- | 635 | °F | ISO 306/B |
Melting Temperature 3 | 644 | °F | ISO 11357-3 |
CLTE - Flow (73 to 131°F) | 1.1E-5 | in/in/°F | ISO 11359-2 |
Surface Resistivity | 1.0E+5 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+7 | ohms·cm | IEC 60093 |
Relative Permittivity |
|
| IEC 60250 |
50 Hz | 6.10 |
|
|
1 MHz | 4.90 |
|
|
Flame Rating (0.06 in) | V-0 |
| UL 94 |
Glow Wire Flammability Index (0.08 in) | 1760 | °F | IEC 60695-2-12 |
Glow Wire Ignition Temperature (0.08 in) | 1650 | °F | IEC 60695-2-13 |
Processing (Melt) Temp | 698 to 716 | °F |
|
Mold Temperature | 320 to 392 | °F |
|
