蜜臀一区二区三区,久久精品国产精品,刘亦菲毛片

Crastin? S650FR NC010

Manufacturer: Celanese
Produced At: Import/ China
Product Category: PBT
Product No: Crastin? S650FR NC010
Product Quantity: 25KG / BAG
Product Features: Flame Retardant

Product information

Crastin? S650FR NC010

THERMOPLASTIC POLYESTER RESIN

Product Description:

Unreinforced, Flame Retardant, Polybutylene Terephthalate

Additive	Flame Retardant
Features	Flame Retardant
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Injection Molding
Part Marking Code (ISO 11469)	PBT-FR(17)
Resin ID (ISO 1043)	PBT-FR(17)

Physical	Nominal Value	Unit	Test Method
Density	1.46	g/cm3	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	1.6	%
Across Flow 3	2.2	%
Flow	1.8	%
Flow 3	2.2	%
Water Absorption			ISO 62
Saturation, 73°F, 0.0787 in	0.39	%
Equilibrium, 73°F, 0.0787 in, 50% RH	0.15	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	435000	psi	ISO 527-2
Tensile Stress (Yield)	9430	psi	ISO 527-2
Tensile Strain (Yield)	4.6	%	ISO 527-2
Nominal Tensile Strain at Break	7.2	%	ISO 527-2
Tensile Creep Modulus			ISO 899-1
1 hr	363000	psi
1000 hr	261000	psi
Flexural Stress	14500	psi	ISO 178
Poisson's Ratio	0.37		ISO 527
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	1.7	ft·lb/in2
73°F	1.9	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	31	ft·lb/in2
73°F	33	ft·lb/in2
Notched Izod Impact Strength			ISO 180/1A
-22°F	1.9	ft·lb/in2
73°F	1.9	ft·lb/in2
Unnotched Izod Impact Strength			ISO 180/1U
-22°F	20	ft·lb/in2
73°F	21	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	320	°F	ISO 75-2/B
264 psi, Unannealed	149	°F	ISO 75-2/A
Vicat Softening Temperature	347	°F	ISO 306/B50
Melting Temperature 4	430	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	6.7E-5	in/in/°F
Transverse	6.7E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+15	ohms	IEC 60093
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength	640	V/mil	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	3.40
1 MHz	3.50
Dissipation Factor			IEC 60250
100 Hz	7.1E-4
1 MHz	0.018
Comparative Tracking Index	225	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94, IEC 60695-11-10, -20
0.030 in	V-0
0.06 in	V-0
Oxygen Index	30	%	ISO 4589-2
FMVSS Flammability	DNI		FMVSS 302

Fill Analysis	Nominal Value	Unit
Ejection Temperature	338	°F

Injection	Nominal Value	Unit
Drying Temperature	248	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	0.040	%
Processing (Melt) Temp	464 to 500	°F
Melt Temperature, Optimum	482	°F
Mold Temperature	86 to 266	°F
Mold Temperature, Optimum	176	°F
Holding Pressure	8700	psi
Back Pressure	As low as possible
Drying Recommended	yes
Hold Pressure Time	3.00	s/mm

Products

Products

Crastin? S650FR NC010

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service