国产精品二区在线,激情网站免费,少女情窦初开的第4集在线观看

CYCOLOY? FR Resin CX7211

Manufacturer: SABIC
Produced At: Import/ China
Product Category: Polycarbonate + ABS
Product No: CYCOLOY FR Resin CX7211
Product Quantity: 25KG / BAG
Product Features: Good Flow，Good Impact Resistance，Medium Heat Resistance

Product information

CYCOLOY? FR Resin CX7211

Polycarbonate + ABS

SABIC Innovative Plastics

Product Description:

CYCOLOY CX7211 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is an enhanced performance & processibility grade that can be injection molded. This non-chlorinated, non-brominated flame retardant PC/ABS has a UL V0 & 5VA/B flame rating. CYCOLOY CX7211 resin is an excellent candidate for a wide variety of thin wall applications including enclosures.

Features	Good Flow，Good Impact Resistance，Medium Heat Resistance
Uses	Appliances，Electrical/Electronic Applications，Electronic Displays，F(xiàn)luid Handling，Lighting Applications，Rail Applications
Appearance	Colors Available
Processing Method	Injection Molding
Also Available In	Asia PacificEurope

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity
--	1.18		ASTM D792
--	1.19	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)	16	g/10 min	ASTM D1238
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)	0.854	in3/10min	ISO 1133
Molding Shrinkage - Flow (0.126 in)	4.0E-3 to 6.0E-3	in/in	Internal Method
Water Absorption			ISO 62
Saturation, 73°F	0.24	%
Equilibrium, 73°F, 50% RH	0.12	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
-- 3	428000	psi	ASTM D638
--	406000	psi	ISO 527-2/1
Tensile Strength
Yield 4	9570	psi	ASTM D638
Yield	8990	psi	ISO 527-2/50
Break 4	8700	psi	ASTM D638
Break	7980	psi	ISO 527-2/50
Tensile Elongation
Yield 4	4.0	%	ASTM D638
Yield	4.0	%	ISO 527-2/50
Break 4	98	%	ASTM D638
Break	90	%	ISO 527-2/50
Flexural Modulus
1.97 in Span 5	399000	psi	ASTM D790
-- 6	363000	psi	ISO 178
Flexural Stress
-- 6, 7	14500	psi	ISO 178
Yield, 1.97 in Span 5	14900	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength 8			ISO 179/1eA
-22°F	4.8	ft·lb/in2
73°F	19	ft·lb/in2
Notched Izod Impact
-22°F	2.3	ft·lb/in	ASTM D256
73°F	12	ft·lb/in	ASTM D256
-22°F 9	4.8	ft·lb/in2	ISO 180/1A
73°F 9	19	ft·lb/in2	ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)	531	in·lb	ASTM D3763

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed, 0.126 in	201	°F	ASTM D648
66 psi, Unannealed, 0.252 in	216	°F	ASTM D648
264 psi, Unannealed, 0.126 in	192	°F	ASTM D648
264 psi, Unannealed, 0.252 in	205	°F	ASTM D648
264 psi, Unannealed, 0.157 in, 2.52 in Span 10	194	°F	ISO 75-2/Af
Vicat Softening Temperature	221	°F	ASTM D1525 11, ISO 306/B50,ISO 306/B120
Ball Pressure Test (163 to 171°F)	Pass		IEC 60695-10-2
CLTE
Flow : -40 to 104°F	3.4E-5	in/in/°F	ASTM E831
Flow : -40 to 104°F	4.2E-5	in/in/°F	ISO 11359-2
Transverse : -40 to 104°F	3.1E-5	in/in/°F	ASTM E831
Transverse : -40°F	4.2E-5	in/in/°F	ISO 11359-2
Thermal Conductivity	1.4	Btu·in/hr/ft2/°F	ISO 8302
RTI Elec	194	°F	UL 746
RTI Imp	194	°F	UL 746
RTI Str	194	°F	UL 746

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	> 1.0E+15	ohms	IEC 60093
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength			IEC 60243-1
0.0315 in, in Oil	890	V/mil
0.0630 in, in Oil	640	V/mil
0.126 in, in Oil	430	V/mil
Comparative Tracking Index (CTI)	PLC 3		UL 746
High Amp Arc Ignition (HAI) 12	PLC 0		UL 746
Hot-wire Ignition (HWI)	PLC 2		UL 746
Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
0.05 in	V-1
0.06 in	V-0
0.08 in	5VB
0.10 in	5VA
Glow Wire Flammability Index (0.04 in)	1760	°F	IEC 60695-2-12
Glow Wire Ignition Temperature			IEC 60695-2-13
0.04 in	1470	°F
0.12 in	1470	°F
Oxygen Index	32	%	ISO 4589-2

Injection

Nominal Value

Unit

Drying Temperature

176 to 194

°F

Drying Time

3.0 to 4.0

Suggested Max Moisture

0.040

Suggested Shot Size

30 to 80

Rear Temperature

428 to 491

°F

Middle Temperature

428 to 509

°F

Front Temperature

473 to 527

°F

Nozzle Temperature

473 to 527

°F

Processing (Melt) Temp

473 to 527

°F

Mold Temperature

140 to 176

°F

Back Pressure

43.5 to 102

psi

Screw Speed

40 to 70

rpm

Vent Depth

1.5E-3 to 3.0E-3

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Consultation

展開

Products

Products

CYCOLOY? FR Resin CX7211

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service