亚洲最大看欧美片网站,久久天堂,天堂综合在线

CYCOLOY? FR Resin CX2244ME

Manufacturer: SABIC
Produced At: Import/ China
Product Category: Polycarbonate + ABS
Product No: CYCOLOY FR Resin CX2244ME
Product Quantity: 25KG / BAG
Product Features: Chemical Resistant，Flame Retardant，Good Flow，Good Impact Resistance

Product information

CYCOLOY? FR Resin CX2244ME

Polycarbonate + ABS

SABIC Innovative Plastics

Product Description:

CYCOLOY CX2242ME Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is an improved chemical resistant grade that can be injection molded. This non-chlorinated, non-brominated flame retardant PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY CX2242ME resin is an excellent candidate for a wide variety of thin wall applications including enclosures for hospital equipment.

Additive	Flame Retardant
Features	Chemical Resistant，F(xiàn)lame Retardant，Good Flow，Good Impact Resistance
Uses	Appliances，Construction Applications，Electrical/Electronic Applications，Electronic Displays，F(xiàn)luid Handling，Medical/Healthcare Applications，Pharmaceuticals
Processing Method	Injection Molding
Also Available In	Asia PacificEurope

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity
--	1.19		ASTM D792
--	1.20	g/cm3	ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)	18	g/10 min	ASTM D1238
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)	0.915	in3/10min	ISO 1133
Molding Shrinkage - Flow (0.126 in)	4.0E-3 to 6.0E-3	in/in	Internal Method
Water Absorption			ISO 62
Saturation, 73°F	0.20	%
Equilibrium, 73°F, 50% RH	0.10	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
-- 3	377000	psi	ASTM D638
--	377000	psi	ISO 527-2/1
Tensile Strength
Yield 4	9430	psi	ASTM D638
Yield	9430	psi	ISO 527-2/50
Break 4	8410	psi	ASTM D638
Break	7250	psi	ISO 527-2/50
Tensile Elongation
Yield 4	4.1	%	ASTM D638
Yield	4.0	%	ISO 527-2/50
Break 4	100	%	ASTM D638
Break	90	%	ISO 527-2/50
Flexural Modulus
1.97 in Span 5	363000	psi	ASTM D790
-- 6	363000	psi	ISO 178
Flexural Stress
-- 6, 7	13900	psi	ISO 178
Yield, 1.97 in Span 5	15100	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength 8			ISO 179/1eA
-22°F	4.8	ft·lb/in2
73°F	19	ft·lb/in2
Notched Izod Impact
-22°F	3.3	ft·lb/in	ASTM D256
73°F	13	ft·lb/in	ASTM D256
-22°F 9	4.8	ft·lb/in2	ISO 180/1A
73°F 9	19	ft·lb/in2	ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)	575	in·lb	ASTM D3763

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
264 psi, Unannealed, 0.126 in	192	°F	ASTM D648
264 psi, Unannealed, 0.157 in, 2.52 in Span 10	199	°F	ISO 75-2/Af
Vicat Softening Temperature
--	230	°F	ASTM D1525 11, ISO 306/B50 11
--	235	°F	ISO 306/B120
Ball Pressure Test (163 to 171°F)	Pass		IEC 60695-10-2
CLTE
Flow : -40 to 104°F	4.2E-5	in/in/°F	ASTM E831, ISO 11359-2
Transverse : -40 to 104°F	4.2E-5	in/in/°F	ASTM E831
Transverse : -40°F	4.2E-5	in/in/°F	ISO 11359-2
RTI Elec	194	°F	UL 746
RTI Imp	194	°F	UL 746
RTI Str	194	°F	UL 746

Electrical	Nominal Value	Unit	Test Method
Comparative Tracking Index (CTI)	PLC 3		UL 746
High Amp Arc Ignition (HAI) 12	PLC 0		UL 746
Hot-wire Ignition (HWI)	PLC 3		UL 746
Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
0.030 in	V-0
0.06 in	5VB
Glow Wire Flammability Index (0.12 in)	1760	°F	IEC 60695-2-12
Glow Wire Ignition Temperature (0.12 in)	1470	°F	IEC 60695-2-13

Injection	Nominal Value	Unit
Drying Temperature	176 to 194	°F
Drying Time	2.0 to 4.0	hr
Suggested Max Moisture	0.020	%
Hopper Temperature	140 to 176	°F
Rear Temperature	446 to 536	°F
Middle Temperature	464 to 554	°F
Front Temperature	482 to 572	°F
Nozzle Temperature	482 to 572	°F
Processing (Melt) Temp	482 to 572	°F
Mold Temperature	140 to 185	°F
Vent Depth	1.2E-3 to 3.0E-3	in

Products

Products

CYCOLOY? FR Resin CX2244ME

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service