Radilon? D 40K 100 NAT 5939
Polyamide 610
PA610 high viscosity extrusion grade. Heat stabilized. Natural colour.
Suitable for extrusion of rigid tubes and profiles.
This grade is partially renewably-sourced (60% of base polymer by weight).
Additive | |
Features | - Heat Stabilized，High Viscosity，Renewable Resource Content
|
Uses | |
RoHS Compliance | |
Appearance | |
Processing Method | - Extrusion，Profile Extrusion
|
Resin ID (ISO 1043) | |
Density | 1.08 | g/cm3 | ISO 1183 |
Water Absorption |
|
| ISO 62 |
Saturation, 73°F, 0.0787 in | 3.2 | % |
|
Equilibrium, 73°F, 0.0787 in, 50% RH | 1.4 | % |
|
Tensile Modulus | 312000 | psi | ISO 527-2/1A/1 |
Tensile Stress (Yield) | 8700 | psi | ISO 527-2/1A/50 |
Tensile Strain (Yield) | 4.5 | % | ISO 527-2/1A/50 |
Nominal Tensile Strain at Break | 80 | % | ISO 527-2/1A/50 |
Flexural Modulus 2 | 283000 | psi | ISO 178 |
Flexural Stress 2 | 11300 | psi | ISO 178 |
Charpy Notched Impact Strength (73°F) | 2.4 | ft·lb/in2 | ISO 179/1eA |
Heat Deflection Temperature (264 psi, Unannealed) | 131 | °F | ISO 75-2/Af |
Melting Temperature 3 | 423 | °F | ISO 11357-3 |
Flame Rating (0.031 in) | HB |
| UL 94 |
Drying Temperature - Desiccant Dryer | 176 | °F |
|
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr |
|
Dew Point - Desiccant Dryer | -4 | °F |
|
Suggested Max Moisture | 0.10 | % |
|
Processing (Melt) Temp | 446 to 500 | °F |
|
Mold Temperature | 158 to 176 | °F |
|
Injection Rate | Moderate |
|
|
Melt Temperature | 446 to 482 | °F |
|
