91女人18毛片水多国产,影院一区,精品一二区

Stanyl? TW341-N

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyamide 46（PA46）
Product No: Stanyl TW341-N
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized，Lubricated，Platable

Product information

Stanyl? TW341-N

Polyamide 46

Product Description:

Heat Stabilized, Lubricated

Special Features:

Contains release agent

Heat stabilized or stable to heat

Lubricated

Platable

Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Additive	Heat Stabilizer、Lubricant、Mold Release
Features	Heat Stabilized、Lubricated、Platable
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA46

Physical	Dry	Conditioned	Unit	Test Method
Density	1.18	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	2.0	--	%
Flow	2.0	--	%
Water Absorption				ISO 62
Saturation, 73°F	14	--	%
Equilibrium, 73°F, 50% RH	3.7	--	%
Viscosity Number	185	--	cm3/g	ISO 307

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus				ISO 527-2
--	479000	145000	psi
248°F	116000	--	psi
320°F	94300	--	psi
356°F	87000	--	psi
392°F	72500	--	psi
Tensile Stress				ISO 527-2
Yield	14500	7980	psi
Yield, 248°F	7250	--	psi
Yield, 320°F	5800	--	psi
Yield, 356°F	5080	--	psi
Yield, 392°F	4350	--	psi
Tensile Strain (Yield)	10	20	%	ISO 527-2
Nominal Tensile Strain at Break				ISO 527-2
--	40	> 50	%
356°F	> 50	--	%
392°F	> 50	--	%
Flexural Modulus				ISO 178
--	435000	131000	psi
248°F	116000	--	psi
320°F	87000	--	psi
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	1.9	1.9	ft·lb/in2
73°F	4.8	17	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	No Break	No Break
73°F	No Break	No Break
Notched Izod Impact Strength				ISO 180/1A
-40°F	1.9	1.9	ft·lb/in2
73°F	4.8	17	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	536	--	°F	ISO 75-2/B
264 psi, Unannealed	374	--	°F	ISO 75-2/A
Glass Transition Temperature 2	167	--	°F	ISO 11357-2
Vicat Softening Temperature	554	--	°F	ISO 306/B50
Melting Temperature 2	563	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	4.7E-5	--	in/in/°F
Transverse	6.1E-5	--	in/in/°F
Thermal Index - 5000 hr	306	--	°F	IEC 60216

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+15	1.0E+9	ohms·cm	IEC 60093
Electric Strength	640	380	V/mil	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	3.90	22.0
1 MHz	3.60	4.50
Dissipation Factor				IEC 60250
100 Hz	7.0E-3	0.87
1 MHz	0.026	0.12
Comparative Tracking Index	400	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Oxygen Index	27	--	%	ISO 4589-2

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	536 to 608	°F
Middle Temperature	572 to 608	°F
Front Temperature	572 to 608	°F
Nozzle Temperature	572 to 608	°F
Processing (Melt) Temp	590 to 608	°F
Mold Temperature	176 to 248	°F
Injection Rate	Moderate-Fast
Back Pressure	290 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Stanyl? TW341-N

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service