人人爱人人插,www.狠狠干,啦啦啦中文在线观看日本

Stanyl? TW242FM10

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyamide 46（PA46）
Product No: Stanyl TW242FM10
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized，Lubricated

Product information

Stanyl? TW242FM10

Polyamide 46

Product Description:

50% Glass/Mineral Reinforced, Heat Stabilized

Special Features:

Heat stabilized or stable to heat

Lubricated

Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Filler / Reinforcement	Glass\Mineral, 50% Filler by Weight
Additive	Heat Stabilizer、Lubricant
Features	Heat Stabilized、Lubricated
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA46-(GF+MF)50

Physical	Nominal Value	Unit	Test Method
Density	1.63	g/cm3	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow	1.3	%
Flow	0.20	%
Water Absorption			ISO 62
Saturation, 73°F	6.8	%
Equilibrium, 73°F, 50% RH	1.8	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2.10E+6	psi	ISO 527-2
Tensile Stress (Break)	23200	psi	ISO 527-2
Tensile Strain (Break)	2.0	%	ISO 527-2
Flexural Modulus	1.60E+6	psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	2.1	ft·lb/in2
73°F	2.9	ft·lb/in2
Notched Izod Impact Strength			ISO 180/1A
-40°F	1.9	ft·lb/in2
73°F	2.9	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	554	°F	ISO 75-2/B
264 psi, Unannealed	545	°F	ISO 75-2/A
Glass Transition Temperature 2	167	°F	ISO 11357-2
Melting Temperature 2	563	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	1.4E-5	in/in/°F
Transverse	2.8E-5	in/in/°F
Effective Thermal Diffusivity	1.64E-7	m2/s

Fill Analysis	Nominal Value	Unit
Melt Density	1.43	g/cm3
Melt Thermal Conductivity	2.7	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.402	Btu/lb/°F

Injection	Nominal Value	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	536 to 608	°F
Middle Temperature	572 to 608	°F
Front Temperature	572 to 608	°F
Nozzle Temperature	572 to 608	°F
Processing (Melt) Temp	581 to 608	°F
Mold Temperature	176 to 248	°F
Injection Rate	Moderate-Fast
Back Pressure	290 to 1450	psi
Screw Compression Ratio	2.5:1.0

Products

Products

Stanyl? TW242FM10

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service