秋霞毛片少妇激情免费,九九国产视频,av中文字幕av

TRIREX? 3025A

Manufacturer: INEOS
Produced At: Korea / China
Product Category: PC
Product No: TRIREX 3025A
Product Quantity: 25KG / BAG
Product Features: Good Dimensional Stability，Good Electrical Properties，Good Flow，Low Moisture Absorption，Low Temperature Impact，Resistance，Medium Viscosity，Weather Resistant

Product information

TRIREX? 3025A

Polycarbonate

Samyang Corporation

Product Description:

TRIREX 3025A is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.

CHARACTERISTICS

Superior low temperature impact resistance

Good flow-ability

Workable under a wide range of temperatures (-100°C ~ 135°C)

High electrical performance

Good dimensional stability

Low moisture absorbency

Good weather resistance

APPLICATIONS

TRIREX 3025A resin grade is used in electric and electronic applications, and it shows superior performance as the material for backlight panel of cellular phones.

Medium viscosity. Transparent colors only.

Features	Good Dimensional Stability，Good Electrical Properties，Good Flow，Low Moisture Absorption，Low Temperature Impact Resistance，Medium Viscosity，Weather Resistant
Uses	Appliances，Automotive Applications，Cell Phones，Electrical/Electronic Applications，Optical Applications
Appearance	Clear/Transparent
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.20		ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)	10	g/10 min	ASTM D1238
Molding Shrinkage - Flow (0.118 in)	5.0E-3 to 7.0E-3	in/in	ASTM D955
Water Absorption (24 hr)	0.15	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	9960	psi	ASTM D638
Tensile Elongation (Break)	120	%	ASTM D638
Flexural Modulus	284000	psi	ASTM D790
Flexural Strength (Yield)	12500	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)	16	ft·lb/in	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	257	°F	ASTM D648
CLTE - Flow	2.8E-5 to 3.9E-5	in/in/°F	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	4.0E+16	ohms·cm	ASTM D257
Dielectric Strength	760	V/mil	ASTM D149
Arc Resistance	120	sec	ASTM D495
Flammability	Nominal Value	Unit	Test Method
Flame Rating (0.06 in)	V-2		UL 94

Injection	Nominal Value	Unit
Drying Temperature	248	°F
Drying Time	3.0 to 5.0	hr
Suggested Max Moisture	0.020	%
Rear Temperature	473 to 518	°F
Middle Temperature	500 to 545	°F
Front Temperature	527 to 572	°F
Nozzle Temperature	527 to 590	°F
Processing (Melt) Temp	527 to 590	°F
Mold Temperature	149 to 221	°F
Back Pressure	36.3 to 102	psi
Screw Speed	40 to 70	rpm
Vent Depth	7.9E-4 to 3.1E-3	in

Products

Products

TRIREX? 3025A

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service